The basic components of the system are the pump, piston distributors, tubing and fittings. Optional control and monitoring features are available depending on the type of application.
Pump operation results in pressure build up in the system to a level where the piston distributors activate, dispensing an accurate dose of lubricant to the bearing. The pump then stops, and the system pressure is relieved to a low pressure, allowing the distributors to recharge with lubricant ready for the next cycle.
Operating pressures range from 16 to 315 bar, with venting pressures of 2 to 70 bar, depending on the system type.
Lubricant volumes from each piston are available from 0.01 to 2.5cc, allowing bearings of varying sizes to receive optimum lubricant quantity.
Please contact us for advice on the correct system for your application, email firstname.lastname@example.org or call 01452 733 104 today.